home     corporate website     site map     contact  
 
 
Home
 
  about Fugro Instruments     services     careers     technical papers    
 
 
Fugro Instruments

Electromagnetics @ Fugro Instruments


Technical specifications

  MECHNICAL
- Case size: 45x18x28 cm
- Weight: 6.4 Kg (14 lb) - Batteries not included

ELECTRICAL
- Input Voltage: 21 to 30 Vdc
- Output Voltage Range: 45 - 400 Vdc
- Output Current: 0 - 6 A
- Current monitor output
- Output Power: 600 VA (max)
- Fan-Cooled Heat Sink

CONTROLS & SWITCHES
- Power on-off
- Output Voltage Selector Switches: 100V / 200V / 400V
- Regulation Selector Switch: Volt / Current
- Mode Selector Switch: Direct / Feedback
- Output Control Potentiometer
- Output Reset Switch

INDICATORS LAMPS
- Output Configuration LEDs (4) - 100V / 200V / 400V
- Regulation LEDs - Volt / Current
- Mode LEDs - Direct / Feedback
- Power ON LED
- HV Output LED

OUTPUT JACKS
- Current Monitor Terminals (banana)
- Voltage Monitor Terminals (banana)
- Power OUT: 5-way binding posts (+OUT, -OUT, GND) or 4-pin military twist-lock

INPUT POWER
- External Battery: 21 - 30 Vdc
- Main Power Connector: 4-pin military twist-lock

 Zonge ZPB-600 Voltage Booster

The ZPB-600 is a variable high-voltage DC-DC power supply that can be connected to the ZT-30 TEM Transmitter thus providing a source of high-voltage (400 Vdc max) suitable for driving a resistive load such as a grounded dipole. When operating together, the ZT- 30 with ZPB-600 Power Booster form a battery-powered resistivity/IP transmitter suitable for small-scale engineering and environmental surveys requiring low-powered transmitters.


FEATURES

  • 600 VA Output Power in 3 adjustable voltage ranges [100V/6A, 200V/3A, 400V/1.5A]
  • 24 Vdc Input Power
  • Light-weight and easily transportable


 
IC    |    Disclaimer    |   Fugro © 2006